氧化铬着色的随角异色颜料的制备与性能研究

采用具有干涉色的云母钛作为基质材料,以氧化铬膜着色,制备了随角异色功能颜料。用XRD、X-RiteMA86Ⅱ5角度分光光度计对产物进行测试分析,研究了不同的基质材料对颜料随角异色效果的影响,分析比较了黑白两种不同背底对颜料的明度和变化效果的影响。结果表明,改变基质材料的干涉色可以制得不同变色效果的随角异色颜料,颜料在黑色背底上的明度值变化范围较大,颜料的变色效果比较明显。     

5,6—二亚甲基双环[2.2.1]庚—2—醇及其衍生物的旋光与构型

从（－）－（１Ｓ，２Ｒ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ｉ）和（－）－（１Ｓ，２Ｓ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ⅱ）出发，合成了它们的醚类和取代苯甲酸酯类光学纯的衍生物。通过［α］Ｄ测定和构型分析，发现它们是含有３个手性碳（Ｃ１，Ｃ２和Ｃ４）的桥环化合物，其旋光性与构型的关系均符合可极化度多级圆球不对称性模型。     

Decomposition of Transformer Oil Under Ultrasonic Irradiation During Degassing Process

In the degassing process of transformer oil with ultrasonic waves ,decompostition of the oil was observed.Light hydrocarbons,including methane,ethane,ethylene ,aceylene,propane etc,were found to be released continuously from the oil into headspace within a closed vial placed in an ultrasonic field ,The gases came from decomposition of hydrocarbon molecules under cavitation effect.     

酞菁锰-表面活性剂薄膜电极的电化学表征及其对三氯乙酸的电化学催化作用的研究

将酞菁锰（ＭｎＰｃ）掺入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）的氯仿溶液，并涂布于热解石墨电极表面，待氯仿挥发后即制得ＭｎＰｃ－ＤＤＡＢ薄膜电极。循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有两对还原氧化峰，第一对峰的Ｅｐｃ１＝－０．２７Ｖ，Ｅｐａ１＝０．０１Ｖ；第二对峰的Ｅｐｃ２＝－０．７６Ｖ，Ｅｐａ２＝－０．６２Ｖ（ｖｓ．ＳＣＥ）。本文着重探讨了第二对峰的电化学行为，估计了该体系的电荷传递扩散系数Ｄｃｔ和表观非均相电极反应速率常数Ｋ０′等电化学参数，并可将该薄膜电极用于催化三氯乙酸的电化学还原。     

丹皮酚的电化学氧化及其反应机理研究

研究了在碱性磷酸盐缓冲溶液体系中,丹皮酚在固体电极上的电化学吸附氧化行为。与苯酚的电化学性质比较表明,碱性溶液中丹皮酚在电极表面上发生类似的不可逆的氧化。氧化产物发生随后化学反应,在电极表面生成致密的不导电聚合物膜。利用超微电极技术研究了丹皮酚电化学氧化的动力学过程,并用时间分辨快速扫描现场红外光谱电化学证明了电极表面的聚合物膜是芳醚类聚合物。     

Host-guest complexes of cucubit[8]uril with phenanthrolines and some methyl derivatives

Cucurbituril a molecular container (or host) has a rigid hollow interior cavity which is large enough to accommodate, one or more, smaller molecules (or guests). The cavity is accessible through two carbonyl portal openings. Molecules or guests enter the …     

甘油糖脂的合成 Ⅰ.1,2-二-O-脂酰基-3-O-(α-D-吡喃半乳糖基)-sn-甘油的合成

采用一种有效的方法合成了具有不同链长的二脂酰基α D 半乳糖型甘油糖脂 .将半乳糖烯丙苷化 ,重结晶得到α D 半乳糖烯丙苷 .随后将糖环的羟基用苄基保护 ,再利用OsO4 /NMO(N 甲基 N 氧吗啉 )的二羟基化条件将 1 O烯丙基氧化成为邻二羟基 ,得到 3 O ( 2′ ,3′ ,4′ ,6′ 四 O 苄基 α D 吡喃半乳糖基 ) sn 甘油 .其与不同链长的脂酰氯进行脂酰化反应 ,然后氢解去掉苄基得到五种二脂酰基α D 半乳糖苷基甘油 .利用1HNMR ,13 CNMR ,2DNMR ,IR和MS对化合物的结构进行了确证 .     

Synthetic erythropoietic proteins: tuning biological performance by site-specific polymer attachment

Chemical synthesis in combination with precision polymer modification allows the systematic exploration of the effect of protein properties, such as charge and hydrodynamic radius, on potency using defined, homogeneous conjugates. A series of polymer-modified synthetic erythropoiesis proteins were constructed that had a polypeptide chain similar to the amino acid sequence of human erythropoietin but differed significantly in the number and type of attached polymers. The analogs differed in charge from +5 to -26 at neutral pH and varied in molecular weight from 30 to 54 kDa. All were active in an in vitro cell proliferation assay. However, in vivo potency was found to be strongly dependent on overall charge and size. The trends observed in this study may serve as starting points for the construction of more potent synthetic EPO analogs in the future.     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

气相毛细管柱切割-反吹技术及归一化法分析汽油中的芳烃(英文)

 发展了一种采用毛细管气相柱切割 反吹技术分析汽油中芳烃的方法。利用强极性毛细管预柱将芳烃保留至n C10 的脂肪族化合物之后 ,并将其反吹到非极性毛细管柱中按沸点详细分离分析。该方法使预柱先流出的组分和分析柱流出的组分通过一个微型三通进入同一检测器中 ,因此可用归一化方法定量分析汽油中的芳烃。该方法可在 15min内完成汽油中苯至C10 芳烃的分析 ,结果的相对标准偏差 (RSD)≤ 3% ,切割误差为± 5s时分析结果的RSD≤ 4 %。